| Microspec An Infrared Concentration Monitor |
 |
|
- Designed to monitor low and high concentrations of water in
various solvents, CO and CO2 gas, as well as other
traditional IR applications.
- Ideal for monitoring PPM level WATER in various solvents
- Contains no moving parts and extremely robust allowing for
installations in process stream environments
| Specification |
| Detection : |
IR Photometry
(2 to 10 Micron) |
| Wetted
parts materials : |
SS, Viton, Sapphire |
| Casing/Enclosure
Material : |
Cast Aluminum
704/50 |
| Operating
Temperature : |
Enclosure: -20° to 50°C;
flow cell: 1 to 100° C |
| Operating
Pressure : |
Flow cell 0-50 bar |
| Storage
Temperature : |
-40°C to 85°C |
| Stability
: |
2% of reading/ 24 hours |
| Accuracy : |
±2% full scale |
| Repeatability : |
±2% full scale |
| Electrical : |
24 V DC 100 mA |
| Output : |
4 – 20 mA 700 Ohm load
galvanically isolated |
| Connections to process
: |
1/4" tube fittings |
| Material of construction
: |
Stainless steel body and sapphire
window |
|
|
|
| Specification |
| Measurement principle
: |
UV absorbance
Spec |
Total
sulfur by conversion to SO2 (combustion sampling system) : |
The sulfur based compounds
in the sample . |
| Detector
: |
1024 elements
diode array |
| Light
source : |
Long life Xe lamp |
| Components
: |
H2S COS mercaptans
SO2 |
| Repeatability
: |
±0.5% of scale |
| Measurement range
: |
0-10PPM; 0-100PPM; 0-1000PPM;
0-1%; 0-100% |
| Accuracy : |
±1% of scale (or ±1PPM) |
| Response time : |
20 sec |
| Flow cell |
|
| Temperature : |
-50 to 300C (-60 to 570F) |
| Pressure : |
200 bar (3000 psig) |
| Analog outputs : |
two galvanically isolated
4-20mA |
| Digital communication
: |
RS232 Modbus, TCP/IP Modbus |
| Fault relay : |
One SPDT alarm relay |
| Spectrometer |
|
| Wavelength range : |
190-800nm |
| Analyzer Dimensions
: |
16"(H)x14"(W)x8"(D)
(41x36x20cm) |
| Sampling system : |
24"(H)x24"(W)x12"(D) |
| Area Classifications
: |
Standard |
| General purpose NEMA-4X
IP 65 : |
Optional (Z purged) |
|
|
