| pH: Pharmaceutical Industry, Fermentation,
... |
|
|
|
pH: 0...14
0…130 °C
Max. 6 bar
Refillable electrolyte
- Steam sterilizable
- PROTELYTE electrolyte, air pressurizable
for a clog-free liquid junction.
- EVEREF-F reference cartridge for silver
free electrolyte
- 3 High Performance ceramic diaphragms
for minimal flow dependency
- Extremely long life in proteincontaining
and partly organic solutions
- HAMILTON “PHI” pH glass
|
|
|
pH: 2...12 (0…14
briefly)
0…130 °C
Max. 4 bar
Maintenance free
- Steam sterilizable
- Very long life, ultra stable calibration
after sterilization and practically drift free signals
- No air pressure required, no risk of
empty reference electrolyte compartment
- 3 COATRAMIC diaphragms prevent clogging
due to proteins
- EVEREF-F reference cartridge for silver
free SKYLYTE electrolyte
- HAMILTON “PHI” pH glass
- Not recommended for citric acid and
frequent CIP
|
|
|
pH: 2...12 (0…14
briefly)
0…130 °C
Max. 4 bar at 130 °C
Pt100 in VP-version
- Steam sterilizable and autoclavable
- Long life, stable calibration after
sterilization and virtually drift free signals
- Space saving 12 mm shaft design
- 3 COATRAMIC diaphragms prevent clogging
due to proteins
- EVEREF-F reference cartridge for silver
free SKYLYTE electrolyte
- HAMILTON “PHI” pH glass
- Not recommended for citric acid and
frequent CIP!
|
|
|
| ... Biotechnology, Food and Beverage |
|
| POLILYTE HT, POLILYTE
HTVP |
|
|
pH: 0…14
0…130 °C
Max. 6 bar at 130 °C
Pt100 in VP-version
- It’s a
POLISOLVE!
- Most reproducible measurements
after sterilization and other cleaning
- CIP, steam sterilizable
and autoclavable
- Sterility proven many
times over by the industry!
- 2 SINGLE PORE’s
to contact POLISOLVE directly with the sample for best results
- Up-side-down mounting
with VP-types possible
- HAMILTON “PHI”
pH glass
|
|
|
pH: 2...12 (0…14
briefly)
0…130 °C
Max. 4 bar
Maintenance free
- It’s a POLISOLVE!
- Best measurement accuracy
in very alkaline processes as well as samples with very
low conductivity.
- Steam sterilizable and
autoclavable
- Sterility proven many
times over by the industry!
- 2 SINGLE PORE’s
to contact POLISOLVE directly with the sample for best results
- Up-side-down mounting
with VP-types possible
- HAMILTON “H”
pH glass
|
|
|
The
new benchmark for maintenance- free sensors in pharmaceutical,
fermentation and chemical processes! Great performance in
food and beverage applications provide trouble-free operation!
- Solves about 80% of conventional pH
sensor problems with diaphragms or liquid junctions
- Two SINGLE PORE’s instead
of diaphragms. Never again liquid junction problems and
total break downs!
- Suitable for pH 0 - 14 up to
130 °C
- Designed for all kinds of cleaning:
steam sterilization, autoclavation, CIP, organic solvents,
strong acids
- Fully compatible with TRIS and
HEPES buffers
- Free of unwanted toxic acrylamide
monomer
- The POLISOLVE polymeric electrolyte
is protected by patent law
|
|
|
