pH: 0…14
0…130 °C
Max. 6 bar
Refillable electrolyte
Pt100 in VP-version

• The problem solving pH sensor, that just works longer!
• SKYLYTE electrolyte, air pressurizable for a poison-resistant liquid junction
• EVEREF-B reference cartridge for highest protection of the reference half cell and silver free electrolyte
• 1 platinum diaphragm for clogfree operation
• HAMILTON “PHI” pH glass
• H-XL-type comes with extra thick “H” pH glass for abrasive samples

pH: 0...14
0…130 °C
Max. 6 bar
Refillable electrolyte

• Viscous 3 M KCl electrolyte “KCl-LR” air pressurizable for less contamination
• EVEREF-F reference cartridge prolongs electrode life in aggressive samples
• 3 High Performance ceramic diaphragms for lower risk of blocking
• CHEMOTRODE ORP is the Redox version and comes with a huge platinum ring
• Fits into most common pressurizable armatures for electrodes with a reservoir diameter of about 30 mm

pH: 0…14
0…130 °C
Max. 6 bar at 130 °C
Pt100 in VP-version

• It’s a POLISOLVE (pg. 9)!
• CIP, steam sterilizable and autoclavable
• HAMILTON “PHI” pH glass is almost impossible to poison from process samples
• Most reproducible measurements even in hot caustic due to proprietary pH glass/low drift
• Two SINGLE POREs for direct sample contact with the POLISOLVE electrolyte. No clogging!
• Upside-down mounting with VP-types possible

pH: 0…14 or
Redox: +/- 2000 mV
0…130 °C; Max. 16 bar at
25 °C or 6 bar at 130 °C
Pt100 in VP

• Maintenance free reference
  gel electrolyte
• 3 High Performance ceramic diaphragms for reduced flowing potentials when mounted in pipes
• Hamilton “H” pH glass provides the most accurate readings at high pH values or high temperatures
• OXYTRODE PT is a Redox sensor with a platinum wire coil melted onto the glass
• Standard 12 mm shaft

pH: 0…14
0…130 °C
Max. 6 bar at 130 °C
Pt100 in HTVP and
HTSK version

• It’s a POLISOLVE (pg. 9)!
• Withstands continuous high process temperature
• Specially formed pH glass for improved mechanical stability
• Propriety pH glass for improved mechanical stability
• Two SINGLE POREs for direct sample contact with the POLISOLVE electrolyte. No Clogging!
• Upside-down mounting with VP-types possible

pH: 0…14
-10…100 °C
Max. 6 bar at 100 °C
For up to 0.01M HF at 20 °C
and 0.05M HF at 50°C

• It’s a POLISOLVE (pg. 9)!
• HF - Hydrofluoric acid containing applications dissolve normal pH glasses within hours at low pH values
• HAMILTON "HF" pH glass is much more resistant to HF than other pH glasses. This significantly increases sensor lifetime
• Stable readings in those harsh conditions
• Two SINGLE POREs for direct sample contact with the POLISOLVE electrolyte