pH: 0…14 or
Redox: +/- 2000 mV
-10…40 °C, briefly 60 °C
Max. 6 bar at 60 °C
Pt100 in SK-version

• It’s a POLISOLVE (pg. 9)!
• Suitable for slightly contaminated water and waste water
• Robust plastic shaft with pH membrane protection
• POLYPLAST PRO SK are equiped with a built-in Pt100 and a SMEK connector head
• POLYPLAST PRO RX is the redox sensor version
• SINGLE PORE for direct sample contact with the POLISOLVE electrolyte. No clogging!

pH: 0…14 or
Redox: +/- 2000 mV
-10…60 °C
Max. 6 or 50 bar at 60 °C
Pt1000 in VP-version

• It’s a POLISOLVE (pg. 9)!
• Suitable for samples containing solids, bacteria or sludge as well as normal drinking water
• POLILYTE PRO XP pH sensors withstand continuous pressure of 50 bar!
• POLILYTE PRO VP are equipped with a built-in Pt1000
• POLILYTE RX is the redox sensor version
• SINGLE PORE for direct sample contact with the POLISOLVE electrolyte. No clogging!

pH: 0…14
0…130 °C
Max. 6 bar at 130 °C
Pt100 in HTVP and
HTSK version

• It’s a POLISOLVE (pg. 9)!
• For all extremely demanding applications requiring maintenance free sensors
• Withstands continuous high process temperature
• Very well protected reference system with the EVEREF-L reference systems
• Two SINGLE POREs for direct sample contact with the POLISOLVE electrolyte. No clogging!
• Upside-down mounting with VP-types possible

pH: 0…14
-10…100 °C
Max. 6 bar at 100 °C
For up to 0.01M HF at 20 °C
and 0.05M HF at 50°C

• It’s a POLISOLVE (pg. 9)!
• HF - Hydrofluoric acid containing applications dissolve normal pH glasses within hours at low pH values
• HAMILTON "HF" pH glass is much more resistant to HF than other pH glasses. This significantly increases sensor lifetime
• Stable readings in those harsh conditions
• Two SINGLE POREs for direct sample contact with the POLISOLVE electrolyte

pH: 0…14 or
Redox: +/- 2000 mV
0…130 °C; Max. 16 bar at
25 °C or 6 bar at 130 °C
Pt100 in VP

• Maintenance free reference
  gel electrolyte
• 3 High Performance ceramic diaphragms for reduced flowing potentials when mounted in pipes
• Hamilton “H” pH glass provides the most accurate readings at high pH values or high temperatures
• OXYTRODE PT is a Redox sensor with a platinum wire coil melted onto the glass
• Standard 12 mm shaft

pH: 0…14
0…130 °C
Max. 6 bar
Refillable electrolyte
Pt100 in VP-version

• The problem solving pH sensor, that just works longer!
• SKYLYTE electrolyte, air pressurizable for a poison-resistant liquid junction
• EVEREF-B reference cartridge for highest protection of the reference half cell and silver free electrolyte
• 1 platinum diaphragm for clogfree operation
• HAMILTON “PHI” pH glass
• H-XL-type comes with extra thick “H” pH glass for abrasive samples